MIL-DTL-45225F(MR)
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3
and 4 of this specification. This section does not include documents in other
sections of this specification or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following standard forms a
part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the issue of the
Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-662 - V50 Ballistic Test For Armor
(Unless otherwise indicated, copies of the standard listed above are available
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues
of the documents which are DoD adopted are those listed in the issue of the
DoDISS cited in the solicitation. Unless otherwise specified, the issues of
documents not listed in the DoDISS are the issues of the documents cited in the
solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
B557
Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
E34
Chemical Analysis of Aluminum and Aluminum-Base Alloys
E227
Optical Emission Spectrometric Analysis of Aluminum and Aluminum
Alloys by the Point-to Plane-Technique
E607
Optical Emission Spectrometric Analysis of Aluminum and Aluminum
Alloys by the Point-to-Plane Technique, Nitrogen Atmosphere
E716
Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
E1251 Optical Emission Spectrometric Analysis of Aluminum and Aluminum
Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar
Self-Initiating Capacitor Discharge
(Application for copies should be addressed to the American Society for Testing
and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959).
2.4 Order of precedence. In the event of a conflict between the text of this
document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business