MIL-DTL-46083D(MR)
APPENDIX A
TABLE A-II. Minimum required ballistic limits for class I armor extrusions
(protection at 0° obliquity) - 20 mm FSP projectile - Continued.
______________________________________________________________________________
Thickness
Required
Thickness
Required
Thickness
Required
Inches
BL(P), fps
Inches
BL(P), fps
Inches
BL(P), fps
1.615
2645
1.655
2760
1.695
2880
2/1.700
1.620
2659
1.660
2775
2895
1.625
2673
1.665
2789
1.705
2910
1.630
2688
1.670
2804
1.710
2926
1.635
2702
1.675
2819
1.715
2941
1.640
2716
1.680
2834
1.720
2957
1.645
2731
1.685
2849
1.725
2973
1.650
2745
1.690
2864
1.730
2988
______________________________________________________________________________
1/
Specification requirements begin with 1.001 inch ordered thickness.
Required BL(P) = 1356 fps.
2/
Specification requirements end with this ordered thickness.
Note:
Tabulated values on either side of the specification requirements are
for interpolation of BL(P) requirements on undersize or oversize plates.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business