Forgings Mil-Specs - FSC FORG

DOD-C-24676 - Copper-Nickel Alloy Bar, Rod And Forged Shapes, High Strength (Metric)

This specification covers copper-nickel alloys with 58,000 minimum yield strength in wrought bars, rod and forged shapes.

DOD-F-24669 - Forgings And Forging Stock, Steel Bars, Billets And Blooms, General Specification For (Metric)

This specification covers the general requirements for carbon steel, alloy steel and stainless steel bars, forgings and reforging stock.

DOD-F-24669/1 - Forgings And Forging Stock, Steel (Carbon And Alloy) Blooms, Bars,Billets And Slabs (Metric)

DOD-F-24669/2 - Forgings And Forging Stock, Steel Bars And Billets - Chromium-Molybdenum Alloy (Metric)

DOD-F-24669/3 - Forgines And Forging Stock, Steel Bars And Billets For Nitriding (Metric)

DOD-F-24669/5 - Forgings And Forging Stock, Steel Bars, Billets And Wire (Chromium-Nickel-Phosphorous And Chromium-Nickel-Manganese-Phosphorous) Low Magnetic Permeability (Metric)

DOD-F-24669/6 - Forgings And Forging Stock, Steel Bars And Billets, Corrosion Resisting; For Reforging (Metric)

DOD-F-24669/7 - Forgings And Forging Stock, Steel Bars And Billets, Corrosion Resisting; Naval Steam Turbine Parts Use (Metric)

MIL-A-22771 - Aluminum Alloy Forgings, Heat Treated (S/S By Sae-Ams-A-22771)

MIL-C-13351 - Copper Alloy Number 377 Forgings

MIL-C-24679 - Copper-Nickel Alloy Forgings And Forging Stdcl

This specification covers copper-nickel alloy forgings (including bar and rod) and forging stock for use in application involving seawater exposure.

MIL-DTL-13823 - Steel: Shapes, Rolled Or Forged; Bars, Flats And Special Sections (For Armor)

This specification covers weldable steel bars, flats and special sections produced from billets to specified dimensions by rolling or forging, for armored vehicle components.

MIL-DTL-45225 - Aluminum Alloy Armor, Forged

This specification covers forged aluminum alloy armor, die forgings from 3/4 inch up to and including 3 inches in thickness for type I, class A forgings, and from 3/4 inch up to and including 4 inches for type I, class B forgings. Type II forging thicknesses should be as specified (see 6.2).

MIL-DTL-46035 - Titanium Alloy: High Strength, Wrought (For Critical Components)

This specification covers high strength wrought titanium alloys, in annealed or heat treated shapes, having a critical section thickness of one-quarter to two and one-half inches, for critical components other than armor, such as tubes, chambers, and nozzles (see 6.3.1).

MIL-DTL-46083 - Aluminum Alloy Armor, Extruded, Weldable

This specification covers extruded aluminum alloy armor shapes up to and including 2 inches in thickness (see 3.3 and 6.2).

MIL-F-24669/4 - Forgings And Forging Stock, Steel Bars And Billets, Nickel And Nickel-Molybdenum Modified Hadfield; Low Magnetic Permeability (Metric)

MIL-F-24669/8 - Forgings And Forging Stock, Steel For Integral Steam Turbine Rotors

MIL-F-45961 - Forging, Prealloyed Steel Powder

MIL-N-24687 - Nickel-Chromium-Molybdenun-Iron-Columbium Alloy Bars, And Forgings

MIL-R-10185 - Rings, Breech, Steel Forgings For

This specification supports the acquisition of medium-high to high tensile strength alloy steel forgings for breech rings. This specification includes the minimum essential Engineering and Packaging Requirements and the necessary Quality Assurance Provisions to determine that these requirements have been met.

MIL-S-10520 - Steel, Forging, For Projectile Stock (S/S By Astm-A711 Or Astm-A575)

MIL-S-13048 - Steel Forgings (For General Purpose Applications) (S/S By Mil-S-46172)

MIL-S-23009 - Steel Forgings, Alloy, High Yield Strength (Hy-80 And Hy-100) (See Notice 2 For Replacement Information)

This specification covers grade HY-80 and grade HY-100 alloy steel forgings intended for critical structural applications where a weldable, high-strength, high-toughness material is required.

MIL-S-23194 - Steel Forgings, Carbon And Low Alloy

This specification covers carbon and alloy steel forgings, in the heat treated condition suitable for welding

MIL-S-23284 - Steel Forgings, Carbon And Alloy, For Shafts, Sleeves, Propeller Nuts, Couplings, And Stocks (Rudders And Diving Planes)

This specification covers carbon and alloy steel forgings for torsional shafts, including propulsion shafts for ships, sleeves, couplings, propeller nuts, rudder stocks, diving plane stocks, and related parts.

MIL-S-24093 - Steel Forgings, Carbon And Alloy Heat Treated

This specification covers carbon and alloy steel forgings for general shipboard application.

MIL-S-24093/1 - Steel Forgings, Carbon And Alloy Heat Treated (Class B, Alloy Steel, Round Bar)

MIL-S-24093/2 - Steel Forgings, Carbon And Alloy Heat Treated (Class H, Carbon Steel, Hexagonal Bar)

MIL-S-24093/3 - Steel Forgings, Carbon And Alloy Heat Treated (Class B, Alloy Steel, Hexagonal Bar)

MIL-S-24512 - Steel Forgings, Alloy, Structural, High Yield Strength (Hy-130) (See Notice 3 For Replacement Information)

This specification covers HY-130 steel forgings intended primarily for use in combatant submarine hulls.

MIL-S-45203 - Steel Forgings (For Critical Applications), Use Mil-S-46172

MIL-S-46053 - Steel, Forgings, Leaded Alloy

MIL-S-46119 - Steel Forgings, Tubular Parts For Cannon

This specification covers alloy steel forgings that are produced by a hot plastic deformation process such as hammering, pressing, upsetting, extruding or any combination of these processes. This specification includes the minimum essential Engineering and Packaging Requirements and the necessary Quality Assurance Provisions to determine that these requirements have been met.

MIL-S-46172 - Steel Forgings

This specification covers steel forgings that are produced by a hot deformation process such as hammering, pressing, upsetting, extruding, or any combination of these processes (see 6.1).

MIL-S-860 - Steel Forgings For Steam Turbine Rotors (S/S By Mil-F-24669/8)

This specification covers steel turbine rotor forgings for use in steam atmospheres which do not exceed the rated operating temperatures specified in 1.2.

MIL-T-10458 - Tubular Parts For Cannons Over 30 Mm, Steel Forgings For (S/S By Mil-S-46119)

MIL-T-13915 - Tubes, Steel, Seamless: For Cannons And Recoilless Rifles

This specification covers seamless, thin-wall, steel tubes in the quenched and tempered condition for use in the manufacture of cannons and recoilless rifles.

MIL-T-24585 - Titanium Alloy Rod, Discs And Upset Forgings Composition Ti-6A1-6V-2Sn

This specification covers annealed wrought titanium alloy rods, discs, and upset forgings.

MIL-T-24766 - Titanium Forgings And Forgings Stock, High Quality For Ships Service

This specification covers commercially pure titanium forgings and forging stock for use in potential mission or life threatening applications involving exposure to seawater.

QQ-A-367 - Aluminum Alloy Forgings (S/S By Sae-Ams-Qq-A-367)

This specification covers aluminum alloy die forgings and hand forgings.

QQ-M-40 - Magnesium Alloy Forgings (S/S By Astm-B91 And Astm-B661)